A 3D printing dry box that is 90% printable it is designed to store the plastic while in use or not it uses 5 things that are relatively inexpensive parts that i will label you can easily source all these items that was the original point of this project an easy way to have a filament dry box with no drilling cutting no bs just print assemble and print away!
if your spool adapter is loose i find taking a small bit of painters tape and adding 1 or 3 layers of tape help the spool adapter get a snug fit but be careful not to get it too snug or you wont be able to remove them easily to swap spools of plastic
PTFE TUBING
PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, you only need 1 per box
3/4-Inch Precision Performance Ball Bearings 1-3/8-Inch outside diameter
a mini digital Thermometer hydrometer they are all pretty much the same size but for you hyper accurate people 1.89"W x 1.13"H
i personally suggest dry & dry orange indicating silica desiccant beads but any desiccants would do
hydrometer https://www.amazon.com/dp/B08P3QJJZL?psc=1&ref=ppx_yo2ov_dt_b_product_details
Ball Bearings https://www.amazon.com/dp/B002Y289VO?psc=1&ref=ppx_yo2ov_dt_b_product_details
Dry & Dry Silica Desiccant https://www.amazon.com/dp/B002Y289VO?psc=1&ref=ppx_yo2ov_dt_b_product_details
PTFE TUBE and PC4-M6 Fittings https://www.amazon.com/dp/B088DP66ZK?ref=ppx_yo2ov_dt_b_product_details&th=1