BAMBU LAB A1 and A1 MINI - POOP COLLECTOR
Copyright Claim
BAMBU LAB A1 and A1 MINI - POOP COLLECTOR
Boost
96
172
83
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
2.2 h
1 plate
0.24mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
0.2mm layer, 6 walls, 25% infill
Designer
51 min
2 plates
Boost
96
172
83
4
685
326
Released
Description
The A1 and A1 MINI-POOP COLLECTOR basket is designed to collect purged filament during printing, featuring a bottom that can easily open for convenient emptying of the basket without the need to remove it.
To unload the basket, simply lift the axis as much as needed, or as I prefer, place the printer on the edge of the table so that you can directly empty the basket into a trash bin.
UPDATE V2 - BROWN IN PHOTO
As many of you wanted the POOP COLLECTOR closer to the POOP EJECTOR, I have revised it to address the request. The channel is now slightly bigger as well.
UPDATE 3:
Added the model of the bottom lid with TPU silencer.
Feedback is welcome :)
Comment & Rating (83)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Makes a lot of noise when the machine shakes, I think that if you improve that it will be perfect
(Edited)
The designer has replied
1
Reply
Thank you for the feedback. You are right, it makes a lot of noise when something is in. As explained in a previous reply, one solution could be to create a layer of TPU and glue it to the bottom, but I've never tried it since I don’t mind a little noise during calibration compared to having mess all around the office 😌.
(Edited)1
Reply
Replying to @WikiZell
I will give that a try, thanks.
0
Reply
Replying to @LightBulb
I have added a model.
(Edited)
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
it’s a little tough to get the lid on but fits perfect!
The designer has replied
0
Reply
yeah, you have to put the lid on a flat surface and push the basket on it 😌
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
An easy print that's really practical. Printed on my A1 mini with Bambu's grey PLA.
1
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
came out perfect
1
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
gefällt mir sehr gut vorallem wenn auf der linken Seite kein Platz für eine Schale ist
1
Reply
Très belle réalisation. Assemblage parfait et mise en place sur l'imprimante très bien ajusté.
1
Reply
great design, printed in Prusament Galaxy purple PLA
1
Reply
Printed with inner and outer brim on A1 Mini. Really solid walls!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works great
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
For some reason, I can't put 5 stars. Cool model and good for managing the waste
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld