Search models, users, collections, and posts
ACDC
IP Report
Print Profile(1)
0,16mm first layer, 0,08mm next layer, 100% infill
Designer
6.9 h
1 plate
Open in Bambu Studio
Boost
50
110
8
6
77
31
Released
Description
Content has been automatically translated.
Project: ACDC.hfp
Print with 100% infill using a 0.08 mm layer height and a 0.16 mm base layer
The model is 133.63x200mm in size
You can print at higher layer heights below the minimum depth of 0.48 mm
The maximum depth is 4 mm and the actual depth is 2.7 mm
Filaments used:
Black PLA Transmission Distance: 0
Blue Gray PLA B Basic Transmission Distance: 3
Red PLA Transmission Distance: 3.5
Yellow Basic PLA Transmission Distance: 6
White PLA Transmission Distance: 3.5
This print uses 5 unique filaments
Swap instructions:
Start with Black
At layer 12 (1.04 mm), switch to Blue Gray
At layer #15 (1.28mm) switch to Red
At layer #19 (1.6mm) switch to Yellow
At layer #28 (2.32mm) switch to White for the remainder.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (8)