Search models, users, collections, and posts
Eye
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.5 h
1 plate
Open in Bambu Studio
Boost
11
13
3
4
8
2
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 220x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BL basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #11 (0.96mm) swap to Beige
At layer #17 (1.44mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)