Depending on what size print bed you have, you might want to see what size might be printable on your printer, then the following options for printing the ribs i recommend is:
For larger printers: Rib A & B single piece
For smaller printers: Rib A bottom & bottom + Rib B top & bottom + lock pin
Fin Small | 12pcs |
Fin large | 50pcs |
Ring 1 | 1pc |
Ring 2 | 1pc |
Inner column | 1pc |
Rib A | 6pcs |
Rib B | 6pcs |
For smaller printers :
Rib A top | 6pcs |
Rib A bottom | 6pcs |
Rib B top | 6pcs |
Rib B bottom | 6pcs |
Lock Pin | 12pcs |
(the Lock Pin these are only needed to assemble the top and bottom part of Rib A & B)
Filament for printed parts :
Filament of your choise | 2-3kg (2-3 roles) |
IKEA Hemma Cord Set | 1pc |
E27 LED light bulb | 1pc |
https://www.ikea.com/gb/en/p/hemma-cord-set-white-10386577/
(A low wattage is preferred, to prevent softening the printed parts, due to heat dissipated from the bulb Max diameter 80mm)
- The manual have been updated and corrected.