Princess Zelda
Princess Zelda
Print Profile(1)
Description
A pretty floral portrait of Princess Zelda.
----------------------------
A commercial license to sell printed copies is available on my Patreon:
https://www.patreon.com/busykikibee
As part of your membership you will also have access to exclusive files available only on Patreon.
----------------------------
Project: Princess Zelda
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm
This print uses 7 unique filaments
PLA BambuLab Matte Dark Blue
PLA Bambu Basic Blue Cyan
PLA BambuLab Matte Ice Blue
PLA BambuLab Matte Dark Red
PLA BambuLab Basic Yellow
PLA BambuLab Matte Ivory White
PLA Bambu Hot Pink
Swap Instructions:
Start with Dark Blue
At 0.88mm swap to Blue Cyan
At 1.36mm swap to Ice Blue
At 1.52mm swap to Dark Red
At 1.68mm swap to Yellow
At 2mm swap to Ivory White
At 2.08mm swap to Hot Pink
At 2.16mm swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)