Extrudr Spool Weight
Extrudr Spool Weight
Print Profile(1)
Description
I wanted a spool weight for my Extrudr spools so this happened. It has holes in each end for optional desiccant. It has been verified as working with the following Extrudr spools:
- 1kg NX2 PLA
- 750g DuraPro ASA
- 1.1kg PETG
This spool weight screws up reassuringly tightly compared to others I have. It is recommended to close and open it a few times before you use it the first time to wear it in a little.
Printing
The model is designed to be printed directly on the print bed with no supports. I used a 0.4 nozzle with a 0.2mm layer height for everything, and printed the above model using Extrudr NX-2 black.
Versions
2023.12.09: Remove final chamfered edge to aid printability. Add text on side of barrel so it is easy to tell what type of spool this is for. Fix an internal edge to help prevent defects.
2023.12.07: Following feedback, modify the bumps to not be chamfered, be longer and have an easier to grip surface, to allow it to be closed and opened more easily.
2023.12.06: Initial version.
Support
If you like our work please consider joining our club on Printables!
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
