Stores Spools. Uses 4-1" id PVC tubing, 1.315 OD, 1.029 ID any length you choose. Designed to fit on 256mmx256mm Plate. Hot glue joints added if you choose to permanently attach together. No supports needed. Make these as long as you want I used 2ft sections of pipe. Also designed to stack as high as will allow the weight using the adapter included. Designed in Solidworks
PLA or PLA+ works great, I used .25mm step, 2 walls 10% gyroid fill. On P1P Center takes 5hr, Both bottoms take 3.5hrs and both tops take 5 hours. Total of 19 hrs print time.
12-22-23
Added adapter to allow you to stack multiple racks
12-31-23
Modified Print Profile to include adapters if needed
01-24-24
Added Shelf mounts