4-color HueForge Pennywise IT by a.vdh_1983

a.vdh_1983

Art>2D Art

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

5.3 h

1 plate

4.8(13)

Open in Bambu Studio

Boost

Released

Description

If you like my work, i'm open for donations via Paypal. It is much appreciated.

https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL

4-color HueForge Pennywise IT

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Bambu PLA Red Transmission Distance: 5
PLA Bambu PLA Yellow Transmission Distance: 5
PLA Bambu PLA White Matte Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #16 (1.36mm) swap to White Matte for the rest.

Reminder:

My models mostly cover the entire bed,
this means the purge line is sometimes
running through the bottom of the print.
You have 3 options here:
- Leave as is, you can just cut them of afterwards.
- Remove immediately after the purge line is printed.
- Scale the model:

*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.

pennywise

hueforge

Comment & Rating (14)

@escollins01

Print Profile

0.08mm layer, 2 walls, 100% infill

sweet print

@x2nb6jc5zz

outstanding

@timbo0674

Print Profile

0.08mm layer, 2 walls, 100% infill

Perfekt 👍 Danke dafür 😉

@martygirl35

Print Profile

0.08mm layer, 2 walls, 100% infill

Other Issues:Print looks good, but it's very thin and flimsy. Almost paper thin. I've created some thin Hueforges, but this is by far the thinnest I've printed. This cannot be displayed in a stand or it will bend. Would look OK mounted on a wall, or framed.