parrot clock
Print Profile(3)
Description
Project: orologio pappagalli.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 220x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ esun pine green Transmission Distance: 0.1
PLA xing pink Transmission Distance: 5.2
PLA creality grey Transmission Distance: 0.3
PLA sunlu blue Transmission Distance: 2.1
PLA PolyLite Grey Transmission Distance: 1
PLA+ esun bordo Transmission Distance: 2.7
PLA Overture Orange Transmission Distance: 7.1
PLA+ esun gold Transmission Distance: 3.6
PLA generic white Transmission Distance: 6.1
This print uses 10 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to pine green
At layer #10 (0.88mm) swap to pink
At layer #12 (1.04mm) swap to grey
At layer #13 (1.12mm) swap to blue
At layer #15 (1.28mm) swap to Grey
At layer #20 (1.68mm) swap to bordo
At layer #22 (1.84mm) swap to Orange
At layer #23 (1.92mm) swap to gold
At layer #25 (2.08mm) swap to white for the rest.
The mechanic used is present on Amazon at this link,
https://amzn.eu/d/ieTpkph
the characteristic of the one used are as this.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)