UPDATE: v2 has been uploaded due to an issue with the .stl exported from Hueforge in v1. v2 is now the default file.

Hueforge painting of the new Grand Theft Auto 6 logo! Waiting for my pink filament to arrive so I can print this off - will update the model with photos when it's printed! Image is from Hueforge preview until then.

Print instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Blue
At layer #7 (0.64mm) swap to Pink
At layer #14 (1.2mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.

If you're unsure how to swap filament, slice the file and then on the Preview screen use the slider on the right to go to the right layer, then right click and choose Change Filament.

You don't need an AMS for this print - you can load each filament one after the other. To do this, instead of selecting Change Filament, select Add Pause at each specified layer and slice. Enjoy!