A beautifully rendered HueForge art piece depicting a world from a book. This piece is only 2mm thick, but with the layering of colours achieves a wonderful depth effect with a lot of fine details to make this perfect for any book lover's wall.

Print Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ Sunlu Dark Gold Transmission Distance: 1.8
• PLA+ Sunlu Coffee Transmission Distance: 3
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #16 (0.8mm) swap to Dark Gold
• At layer #21 (1mm) swap to Coffee
• At layer #32 (1.44mm) swap to White for the rest.

_____________________________________________

If you like my models and would like to support my 3D printing endeavours, I now have a Patreon! You can get behind the scenes information on WIPs, access to a private discord, and early access to my models.

Subscribing to the $10AUD tier will grant you exclusive models as well as a commercial license to sell the physical prints of any of my models.

_____________________________________________