AMS Holder Riser Slider V3 P1P P1S X1C by Sanja 3D

Sanja 3D

3D Printer>3D Printer Accessories

GIF

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 20% infill

Designer

41 min

1 plate

4.8(244)

0.2mm layer, 4 walls, 30% infill

58 min

1 plate

4.9(13)

IKEA Skadis Holders 0.2mm layer, 4 walls, 25% infill

15 min

1 plate

Open in Bambu Studio

Boost

693

1868

343

298

2.2 k

1.4 k

Released

Description

The AMS Riser Holder Slider is designed to securely hold the AMS unit above the glass, allowing the glass to slide freely for improved ventilation during PLA printing.

This design offers additional benefits, such as:

- preventing the AMS unit from tipping over

- ensuring the AMS unit remains stationary when the glass is moved

- stopping the glass from falling out of place

Engineered as an accessory for a super-efficient, lightweight, and quick solution: https://makerworld.com/en/models/798702

making it a practical upgrade for your setup.

Comment & Rating (343)

@BoyFieri

Boosted

Easy print and flawless design. I even made a little remix of one to use as a simple headphone hook that works really well. Thanks for all of these, huge fan!

@layer1

will you share the remix?

@BoyFieri

Boosted

Replying to @layer1 :

I don't believe that Sanja permits publishing remixes of their stuff, understandably. I shot you a message with the file, but I can't publish it for public use, again, understandably.

@Balint

Oh, that's good! Maybe there is a way for me to request it?

@B3rnd8

Print Profile

0.2mm layer, 3 walls, 20% infill

Parts add too little space between AMS feet and glass so the glass dreams on the ripper feet of the AMS when moved. adding more clearance would definitely improve the solution.

The designer has replied

@Sanja3D

It needs to be that way. If there is more clearance than would the glas move during the printing becouse of the vibrations.

@chadtolkien

Replying to @Sanja3D :

Unfortunately this means that the glass doesn't slide independently of the AMS, it ends up taking it with it.

@thegiftgap

Replying to @chadtolkien :

You need to space them out more. Have one pair of hooks right at the back and the other as close to the front of the AMS as possible. I had this problem too however it was just user error.

@m3_makes

Boosted

Love these clips... what a great solution. Made a modification to my multiboard snaps to work with them. https://makerworld.com/en/models/864983#profileId-816020

@ImageGenerator

very nice

@ImageGenerator

which multi board is this? 👀

@m3_makes

Boosted

Replying to @ImageGenerator :

That is a 9x9 core tile

@user_1171026177

Aesthetically pleasing and practical, but as a novice, I'd like to ask when it's necessary to open the top glass lid

The designer has replied

Show original

@Sanja3D

Hey. I mainly keep it open for PLA printing

@user_1171026177

Replying to @Sanja3D :

Okay, thank you. Could you share the ideal internal operating temperature? (My ambient temperature is around 10-15 degrees Celsius) I previously printed PLA without opening the enclosure without issue, so I would appreciate your guidance🙏

(Edited)

Show original

@Little_Grub

Replying to @user_1171026177 :

You should print PLA with the door or lid open when the ambient temperature in your printing environment is high (e.g., exceeding 25°C or 77°F), leaving the door or lid open can help dissipate heat from the print chamber, preventing overheating, potential clogs and other issues. Your ambient is very low so you probably do not have such issues.

@JoeyTerrifying

It printed good but it is too short for the X1C when front sliding, Can i request a version that 6/7mm higher?

@Jellyfushez

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

wrote a whole massive review as a comment and didn't post it as an actual review... see pictures :)

@Ripmax3

printed everything with PCTG, a very easy and cost effective Mod for the X1C, top glass slides well even without ironing, highly recommend.

@Innocence_Ends

Print Profile

0.2mm layer, 3 walls, 20% infill

Works great.

@CHUANZF

Minor warping may occur after installation, potentially due to tight tolerances

Show original

@danielo2

Boosted

Used all 3 parts (slider, led and ams feet) works fine on my p1s ... Thanks for the work

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

P1S AMS Riser to Raise the Glass Cover

defyant123

Thin 3:1 AMS Slider/Riser | LED Strip | Side Rails

GIF

Thin 3:1 AMS Slider/Riser | LED Strip | Side Rails

Print3DZ

288

336

AMS raiser from the glass plate and put forwards

microcoating

Hex Vent Cover for V3 AMS Glass Slim Riser/Slider

LJ3DAU