Kids Toy Screwdriver & Bits Set
Print Profile(1)
Description
Kids toy screwdriver set, four bits and box to store them in, smooth grip and no sharp edges to make it safe for play.
Matching screws & nuts, wrench and building blocks are available, see below.
Prepared to be printed on three plates so you can select different filaments per part without the need for an AMS.
You might need to pull the bits in and out a couple of times to grind down some edges to make it easier to swap bits, or use a knife to chamfer the edges slightly.
The set in the photos uses Bambu Lab PLA Basic Silver for bits, Red for screwdriver handle and Blue for storage box.
https://makerworld.com/en/models/885130
https://makerworld.com/en/models/890017
https://makerworld.com/en/models/888517
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (71)