Cool leaping brown trout painting made in HueForge.
Orange and green included with printer.
Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
- Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 5.4
PLA BambuLab Basic Orange Transmission Distance: 7.1
PLA BambuLab Basic Jade White Transmission Distance: 5 - Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to BambuLab Green
At layer #11 (1.04mm) swap to Orange
At layer #17 (1.52mm) swap to Jade White for the rest.