WATER TOWER FALLS by Brithawkes

Brithawkes

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 3 walls, 25% infill

Designer

16.4 h

5 plates

5.0(2)

Open in Bambu Studio

Boost

Released

Description

( Disclaimer this model is intended for use with water and possible lights I can take no responsibility for water or electric damage that might occur while using electric water pump or lights you must check that your prints are watertight and safe if in doubt test somewhere safe and use on a tray or something alike first I also would suggest not to leave unattended )

Hi This is my latest design Water Tower Falls it is in 5 parts with a small connector pipe for the pump this might need adapting if you use a different pump I got my pump and lights from amazon the pump was a USB version and the lights are a battery and waterproof version this worked great and has a lovely affect in the room. I have a YouTube video of this running please check it out and maybe consider liking and subscribing for future designs coming. for and more info please message me. Thanks and happy printing

https://youtu.be/3H7V4rmBPXY

this is a long print with most parts taking over 4 hours each I printed it with 3 wall layers to aid in waterproofing and this seemed to be fine for me but please test. I also printed at 0.16 layer heights with a 0.4 nozzle with PLA at at 205 degrees on the nozzle.

Comment & Rating (12)

@hiker

Very nice model!! It looks great, I have printed in P1S. But I see one issue - water flows at the junction of the upper and middle parts. Can you please fix that? Maybe add +6 mm of the inner tube ? Thanks for the great model again !

The designer has replied

@Brithawkes

I will try and fix it I will add a new version if I can thanks for the information

@hiker

Replying to @Brithawkes :

Thank you!

@mcrandall73

Do you have a link to the pump and lights you used?

The designer has replied

@Brithawkes

Gikfun 5V USB Mini Submersible Water Pump Replacement Pump for Aquariums DIY, Fish Tank, Cat Pet Water Fountain EK1527U https://amzn.eu/d/6k2RWI7

@Brithawkes

Ollny 2 Packs 5m 50 LED Fairy Lights Battery Operated, Waterproof Copper Wire String Light for Indoor Outdoor Lighting, Christmas Tree Bedroom Outside Party Bottle Wedding Decorations (Warm White) https://amzn.eu/d/hjrqc2c

@Brithawkes

this is what I used but any small water pump would do and lights hope this helps

@hiker

Looks great! How did you make it waterproof? By using the resin?

The designer has replied

@Brithawkes

mine was waterproof with 0.12 layers and 3 walls but I'd it is not then you could use something to paint on the inside 😉

@ulfbethke

Boosted

Print Profile

0.16mm layer, 3 walls, 25% infill

@Rowan2109

Print Profile

0.16mm layer, 3 walls, 25% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.