Flux Beambox lasercutter honycomb Hold downs
Copyright Claim
Flux Beambox lasercutter honycomb Hold downs
Boost
25
27
15
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
1.5 h
1 plate
Open in Bambu Studio
Boost
25
27
15
0
110
112
Released
Description
A dozen hexagon hold-downs designed to fit snugly into the Beambox and Beambox pro honeycomb plate for laser cutting.
If you have a different laser cutter that has a honeycomb base plate, let me know and I can upload a set of 12 labeled pins with different sizes to help determine what will work for you
Comment & Rating (15)
All
Print Profile
0.2mm layer, 6 walls, 25% infill
sits a little too high for comfort with that raised part on the end.
0
Reply
Printed for my diode laser honeycomb bed and they are too big. I did a scale down test of 90%, 80% and 70%. 70% and 80% fit so I printed more at 75% and that seems to work without being too tight or loose.
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Nice
0
Reply
These are awesome. My honeycomb is 1/4 inch. I have been using drill driver bits to hold things from sliding around. But these hold downs would be better.
0
Reply
I have a Thunderlaser Nova 51... I will have to go measure the honeycomb! I definitely need these. 11.5mm
(Edited)0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
© 2024 MakerWorld