Magnetic Marble Run/Track-Manual version
Print Profile(1)
Description
Manual version of the magnetic marble run/track.
Electric version：https://makerworld.com/en/models/774276
Boost Me (for free)
Thank you for your support！
Note that steel balls are relatively small and pose a certain risk of ingestion for children under 5 years old. Children must play with their parents.
Assembly BOM （Except for the first item, the rest are the same as the electric version）
- 608 bearing 2x
- 5mm × 1mm strong magnet (N52) 10x
- 10mm steel ball (carbon steel, not 304)
- M3 × 10mm cup head screw 13x
- M3 × 6mm cup head screw 4x
- M3 × 6mm countersunk screw 4x
- M2 × 10mm cup head screw 1x
Some precautions:
- The magnet needs to be fixed with glue such as 502.
- When installing the four support columns, pay attention to installing the cutting direction towards the direction of the turntable.
- Try to use N52 magnets, N35 should also work, ordinary magnets are definitely not suitable.
- Some friends may find that there is no disc after opening it in the slicing software. In fact, there is. Because you need to print the logo first, it is not checked in the object. Slice and print the logo directly, then uncheck all logo items in the object, and then check the disc printing.After printing the logo, remember to set "Z lift to 0.8mm", otherwise it may cause the nozzle to scratch.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)