Toroidal Flying Propeller (Pull Copter) & Spinning Top (No Supports, No Assembly Required) by uhltimate

uhltimate

Toys & Games>Outdoor Toys

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.9(201)

0.2mm layer, 2 walls, 15% infill, for A1 Mini

1.7 h

2 plates

4.7(18)

0.2mm layer, 3 walls, 15% infill,no brim

1.1 h

1 plate

4.4(34)

Open in Bambu Studio

Boost

460

980

280

153

2.3 k

1.9 k

Released

Description

V2 Flying Toroidal Propeller

Pull the rod, and the propeller takes off, offering a seamless and exciting aerial experience. Simple, efficient, and designed for enthusiasts who crave controlled flight. Elevate your adventures with the Flying Toroidal Propeller!

— a playful toy for kids. With a propeller, base, and simple pulling rod, it brings excitement to young aviators.

Pull the rod, and the propeller takes flight, offering a fun and straightforward aerial experience.

Designed with simplicity and safety in mind. Elevate your adventures with the Flying Toroidal Propeller!

Info: The toroidal design works better than expected. Use it outdoors; it's pretty strong and flies quite high.

V2 - 26.12.2023

After receiving feedback from numerous children aged 5 to 10 years old, a few modifications were made:

The holder was made slightly taller.
The propeller was strengthened (eliminating the weak point)
The pulling rod was lengthened (by five teeth)

Comment & Rating (280)

@visualdensity

Print Profile

0.2mm layer, 2 walls, 15% infill

Easy and fast to print, yet fully functional. Can't ask for more. Thank you for sharing this!

The designer has replied

@uhltimate

Thank you, that colors are amazing.

@user_2821334797

Replying to @uhltimate :

Yeah! What filament is that? I am printing just in white and black ABS right now! Might need to get a more fun filament for toys for nephew!

@user_2821334797

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed out 4 sets of these at 100% scale in Bambu ABS. Got my 0.2mm nozzle unclogged and printed a 50% scale at 0.1mm layer height. They all work and seem decently durable in ABS.

@user_2821334797

After printing a few at 50% with the 0.2 nozzle I noticed some quality issues on the propellers. It seems that they actually get thinner towards the outside of the circle. This causes there to be some weird patterns with infill. You can see that there is a wall on each side and gap infill except for this small section (check attached photo). Would be awesome if they didn't thin out if possible so that they can be scaled down. The small ones are really great for indoors. Seems like 60% has gap infill or real infill between the two walls all the way along. Will try that next and update. Cheers

@devm33

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Amazing toy! Flies almost too well 😅 Watch out for trees! Made an extended handle model: https://makerworld.com/en/models/569541 for easier holding by adults. The handle on this model work best for kids hands though!

@U3DN

Print Profile

0.2mm layer, 2 walls, 15% infill

Model printed really well, and it flies pretty well too.

@user_3465155917

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great! I love when printing it speeds up/slows down as it's doing the blades, because some are overhangs and some aren't. very fun to watch print