Gridfinity Faceplate for Bambu Lab P1 Series Remixed by Neebick

Remixed by

Neebick

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

2.2 h

1 plate

4.9(12)

0.6mm nozzle, 0.3mm layer, 2 walls, 8% infill PETG supports

1.8 h

1 plate

4.0(1)

Open in Bambu Studio

Boost

Released

Description

An LCD surround and gridfinity slot combo. This is my second revision which now has a cutout below the LCD so that the clips can be squeezed while removing the LCD. Gridfinity slots are rounded on one side for easier printing. There will be a slight sag on the right side. Double sided tape can be used to secure it to the faceplate but truthfully it is not enough to cause issues.

gridfinity

Comment & Rating (15)

@RoyalMilkTeh

Print Profile

0.16mm layer, 2 walls, 15% infill

perfect! thank you

@makerowarmbread

Print Profile

0.16mm layer, 2 walls, 15% infill

Looks great and works well. The right side does droop a bit and my cubes don't fully settle in due to clearance issues on the back but my cubes where printed on very old printers. Great design!

(Edited)

@CullenJWebb

Boosted

I had no issue with fitment using the new version, the screen slips in easily and is snug as a bug. I used tree supports for the Gridfinity arches (nice touch, btw) and the screen support and it came out great. I will add the 0.6 nozzle profile I used with and without the supports for others to adopt.

@Ellinas71

Perfect

@danielsaid

Print Profile

0.16mm layer, 2 walls, 15% infill

prints perfect, I just wish the magnets were press fit instead of needing to be glued. I could have fixed the model by using the hole offset but I forgot what number I used last time, plus I'd need to calibrate the fit. I printed two of these btw so it would definitely have been a good idea