Deer - stag by Áron Pozsár

Áron Pozsár

Art>Sculptures

Print Profile(14)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Normal size

Designer

8.1 h

1 plate

4.8(423)

Small (A1 mini size)

Designer

4.3 h

1 plate

4.7(189)

Super smooth, super fast, improved support

5 h

1 plate

4.5(20)

50% scaled, careful remove support with a cutter, 0.28,4,10%

1.6 h

1 plate

4.8(96)

Click to see more

Open in Bambu Studio

Boost

2498

5350

1065

1.5 k

10.2 k

5.2 k

Released

Description

Boost Me (for free)

huge thanks for every boost!

Update (11.26): the legs are now thicker to have bigger contact surface on the plate. Printing is much more reliable this way.

About the model:

An artistic stag sculpture that can be printed without support.

Many people showed interest towards it, so I also made a doe to pair with the stag. The sizes of the two models are made to match nicely. There is a normal and a small size for both.

I recommend printing the normal size. It captures detail much better and is less fragile.

Print info:

Not an easy print. Since the legs are thin and long, very slow speeds are needed.

Perfectly fine without any support.

Some stringing can be expected but it's not the end of the world.

Commercial License & Support:

If you are interested in selling physical prints of my designs in your local or online store, or if you just want to support my work, go to:

https://www.patreon.com/pozsar

Comment & Rating (1065)

@josephrltpa

Boosted

plz upload more...loving ur designs ^_^

The designer has replied

@layeredd

Thanks! And don't worry, many more will come.:)

@swiersa_42

Boosted

@josephrltpa could you pls share the source of that tree?

@josephrltpa

Boosted

https://makerworld.com/models/798288 its his other uploads...go check hi profile for more

@MW84

Boosted

A truly magnificent model, I printed it at its original size using a custom print profile in 4h41m with a flawless surface finish (0.08 mm layer height) and no visible imperfections

The designer has replied

Show original

@layeredd

Wow, seems like you found the perfect settings. Can you share this profile? I'd give it a recommendation and place it at the top of the list. You could get nice point rewards with it.

@MW84

Boosted

Replying to @layeredd :

I have uploaded my print profile with the recommended settings

Show original

@ScorpiusZA

it's a very lovely shape, I just got some Sunlu PLA+ Silver Silk and it came out beautiful, I can't believe the lack of supports.. the only problem is just the top of the back slope, the steps are a bit ugly, my fault as I had scaled it down so enhanced the steps.. I'll see if I can reduce the layer thickness there. Thanks for a great model.

@user_2137203303

While printing, the legs were bending… using ASA material… what could be the problem

The designer has replied

Show original

@layeredd

I only tested it for PLA and even with the most print-friendly filament it's not an easy print. Maybe ASA is simply just not suitable for this design with the tall and thin legs.

@ReachPoint

ASA will struggle with small features and is VERY likely to bend/warp due to differences in temperatures while cooling. If you were deadset on printing this is ASA, you'd likely want to heat your chamber to really slow down the cooling of the filament. But that's not a built-in feature, so you'd have to break out your space heater. (Not the designer, just a guy who prints). If you want ASA similar material properties, check out PETG. It should behave closer to PLA, but will have more ASA like temperature and water hardiness.

(Edited)

@user_2022073094

This happened twice to us as well the legs detached from the plate

Show original

@creative_maker

Boosted

Hi Áron, thank you so much for creating and sharing your stunning deer model! I recently featured it in a video on my YouTube channel, where I explored printing with wooden filaments (https://youtu.be/NK7JzLaM0iU). Your design truly brought out the challenge of tuning settings for these filaments, especially at slow print speeds. I hope you enjoy seeing your creation featured – thank you again for contributing such an inspiring design to the community!

(Edited)

The designer has replied

@layeredd

Hi! It's a great video and a pleasure to be involved. You'll have a fantastic career on YT with this content quality.

@creative_maker

Boosted

Replying to @layeredd :

thanks for the kind words!

@user_4005950364

Very great design and good print ! Thanks you!

@SongTaeSung

Boosted

This is truly a stunning model Since taking up this hobby, I've never seen such a beautiful design I've added some accents to the horns and haunches using Bambu Studio, to suit my preferences Thank you so much for sharing this exquisite model As an aside, I'm curious which program you used for modeling

Show original

@OlliL

Boosted

Print Profile

Normal size

In the areas of the back and abdomen, where the layers meet very flatly, the layers are clearly visible. However, the model's finish is very fine and elegant

Show original

@davidmenges

Boosted

What filament?

@OlliL

Boosted

Replying to @davidmenges :

PLA Bronze

@eladenis

It's just great) Thank you for the great design. I set the speed to 50% on my printer and it printed just fine

@Papragu

Boosted

Beautifully printable and entirely without supports

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(14)

Description

Update (11.26): the legs are now thicker to have bigger contact surface on the plate. Printing is much more reliable this way.

About the model:

Print info:

Commercial License & Support:

Comment & Rating (1065)

License

Related Models

Deer Door Corner

Deer - stag laying - voronoi pattern

Deer Scenic Door Corner

Oh, Deer! Walter the Stag