Butterfly Clock Hueforge
Print Profile(3)
Description
This clock model is available in 170mm and 245mm sizes.
The 170mm model can also be used as a desk clock. Corresponding mounts for the clocks are also available for download on my page.
Here is the clockwork mechanism I use:
https://www.amazon.de/dp/B0BRYZR1Q9?ref=ppx_yo2ov_dt_b_fed_asin_title
Here are my matching backplates for my 170mm and 245mm clocks:
https://makerworld.com/en/models/689970#profileId-618739
Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer
The model is 170mm or 245mm in size
Higher layer heights below the minimum depth of 0.88mm may be used
The maximum depth is 2.5mm and the actual depth is 2.4mm
Filaments Used:
Geeetech Black PLA Transmission Distance: 0.2
Ziro Dark Grey PLA Transmission Distance: 2.2
Eryone Red PLA Transmission Distance: 1.7
Geeetech White PLA Transmission Distance: 4.4
This print utilizes four distinct filaments
Swap Instructions:
Begin with Black
At layer #12 (1.04mm) switch to Dark Grey
At layer #14 (1.2mm) switch to Red
At layer #23 (1.92mm) switch to White for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)