One Piece Compliant Blaster Remixed by joe400poi

Remixed by

joe400poi

Education>Engineering

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

[95% for A1] +6 darts: 0.16mm layer, 2 walls, 15% infill

1.9 h

1 plate

4.7(11)

12 Darts - 0.2mm layer, 2 walls, 10% infill

2 h

1 plate

4.0(5)

Open in Bambu Studio

Boost

139

112

Released

Description

An easy to print remix of Mark Rober's nerf gun design

nerf blaster

markrober

Comment & Rating (20)

@moonrakerone

I had to bend the trigger up a little to get it to stick better. Would be helpful to include the right dart size with it. I believe this is the 3/4 scale?

(Edited)

The designer has replied

@joe400poi

Yes it is

@MyCreations

Replying to @joe400poi :

Thanks for the help!

@ADHDeezNuts

Print Profile

12 Darts - 0.2mm layer, 2 walls, 10% infill

I’m not sure if this is just the filament I was using (co-extrusion silk pla) or the profile, but the print became a mess of spaghetti after the first 10 or so layers. I tried a few times but it always failed at that point.

The designer has replied

@Fredwood

Hello ADHDeezNuts, thank you for your feedback. I find it strange that it didn't work for you, as it worked for me. But okay, I have now increased the number of top layers, reduced the overhang speed, and also reduced the overall printing speed. I hope that with these adjustments I have solved your problem for the future. best wishes, Fredwood6000✌️

(Edited)

@user_359975261

Print Profile

12 Darts - 0.2mm layer, 2 walls, 10% infill

Printed perfectly and functions well.

@Potterprinter

Print Profile

[95% for A1] +6 darts: 0.16mm layer, 2 walls, 15% infill

Works great

@sherfindal

Print Profile

[95% for A1] +6 darts: 0.16mm layer, 2 walls, 15% infill

cool

@AddictedTo3D

Print Profile

[95% for A1] +6 darts: 0.16mm layer, 2 walls, 15% infill

This looked like a really cool design so I printed it and it works really well. I'll shoot the plastic bullets from it and the cat chases them and loses them for me lmao.