Pocket Pet - Flexi Baby Axolotl by FilliFuu

FilliFuu

Toys & Games>Other Toys & Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

5.5 h

1 plate

4.8(135)

Open in Bambu Studio

Boost

1563

3551

176

182

2.5 k

1.2 k

Released

Description

Brand new pocket pet the adorable articulated axolotl

Fully print in place with no need for support or a brim, super easy to print

Comes with a choice of slot for a keychain holder

This beautiful standard Axolotl is exclusive to Makerworld

Much more on the way soon

Bill of Materials

Maker’s Supply Kits and Parts

10PCS Split Ring Keychain 25mm Silver - MA001

$2.99 USD

B-MA001

× 1

Buy Now

Download BOM

Comment & Rating (176)

@user_3171841309

Print Profile

0.2mm layer, 2 walls, 15% infill

Bed Adhesion Issue: I tried 3 times with 2 different printers and I can say that this model has bed adhesion problem :) It looks so cute and I want to print this model but I can't :(

The designer has replied

@FilliFuu

wow thats alot of bed failures, if your struggling with a clean bed definitely start by slowing your print down

@user_3171841309

Replying to @FilliFuu :

In all 3 prints, the print was slow and I cleaned the table beforehand. I tried with 2 different filaments and 2 different machines but I couldn't find a solution to the problem. Thank you for your answer.

@FilliFuu

Replying to @user_3171841309 :

Sure, what do you use to clean your bed?

@Mcatt

Boosted

Doesn't print properly, the dots in the eyes are the same color as the body.

(Edited)

The designer has replied

@FilliFuu

This was a design choice, so anyone using glow PLA can have entirely glow features - the eyes can be painted in seconds using paint however, hope this helps.

@Mcatt

Boosted

Replying to @FilliFuu :

It does, I repainted them white and it came out well.

@FilliFuu

Replying to @Mcatt :

Lovely )

@Loktorr

Boosted

First, the model design and articulation look to be excellently done, the painting is well done also. Overall a very finished model. However, and I don't know if this is unique to kicking the model off with the Handy app, it is taking far longer than the profile estimated, and with more filament usage. I would say the waste has been 2-3x the estimated total filament use of ~50g. I opened the profile in the desktop slicer this morning and confirmed all the settings. Nothing weird in the profile, and the only suggestion i would make is that you could get away with changing the prime tower to 5, 7, and 1.5 respectively without introducing any bleed. Printer is throwing no notifications and nothing has interrupted the print like ams feed issues or anything like that, it has just been printing happily but slowly all night long lol. Currently at 15 hours and 23 minutes and 94g of filament

The designer has replied

@FilliFuu

Thanks for the compliment - in regards to the speed and wastage I'm a bit surprised, honestly no idea what happened there, its not accidentally in slow mode or something?

@Loktorr

Boosted

Replying to @FilliFuu :

nope it was running in normal speed and using all the profile settings. I did notice toward the end that it was flushing after ever layer even without color changes, but I can’t see that adding up that much. they came out great tho! awesome model

@user_3864056220

Print Profile

0.2mm layer, 2 walls, 15% infill

fun little print. I've made a few for my duaghter and her friends, everyone loves it!

@Blitzdruck

A most pleasing color combination

Show original

@eclipse1234

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Little bit of color bleed but otherwise turned out just fine!

The designer has replied

@FilliFuu

So cute )

@lawsonavy

Print Profile

0.2mm layer, 2 walls, 15% infill

5 stars, it won’t let me submit over 3

The designer has replied

@FilliFuu

Love the colors you chose

@blaze_labs

Print Profile

0.2mm layer, 2 walls, 15% infill

best axolotl yet

The designer has replied

@FilliFuu

Thank you so much )

@pinepicker

Print Profile

0.2mm layer, 2 walls, 15% infill

Top Profile, perfect details and articulation

Show original

@BackDaws

Print Profile

0.2mm layer, 2 walls, 15% infill

I've tried this 2x on different plates and it messes up at the exact same time and part 😥

The designer has replied

@FilliFuu

I recommend then to adjust your K-factor value in your slicer and even slowing the print down. And for your plates, wash both with hot soapy water and scrub them with a coarse sponge then air dry them vertically. Hope this helps.

@user_536324331

Print Profile

0.2mm layer, 2 walls, 15% infill

Pretty elaborate design! There are so many color changes, but man is it an outstanding product once done. I would most likely make the base colors the same to save from having to have multiple layer one prints but otherwise I highly recommend. Have a look, these are art. One thing i noticed is the legs espcially the back ones are sensitive.. Maybe it was how I sliced it, but out of two only one still has a full set of legs :)

The designer has replied

@FilliFuu

Thanks, I tried to keep things as small as possible & actually decreasing wall size and adding extra walls can help strength but at the cost of even more print time )

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Flexi Umbreon Pocket Pet Keychain

FilliFuu

115

Silly Goose Flexi Pocket Pet Keychain

FilliFuu

474

445

Bow and arrow children's toys

ALL3D

Stacking and Building Toys For Babies

lafin