Guitar Mount MultiBoard MultiConnect Hanger

This is a remix of Make Anything's Guitar Wall Mount Hanger with Flexible Top to add support for MultiBoard via MultiConnect. This is available in 45mm, 50mm, 56mm, and 60mm versions depending on the neck width of your guitar. 

For printing use 100% infill for the arm and use TPU for the padding. Use the default orientation.  The 45mm version of the arm will require some method to prevent warping such as brims, glue on the build plate, or a tacky build plate such as the BIQU CryoGrip or Bambu Cool Plate SuperTack.  I personally usedMagigoo liquid glue for my print. For the TPU make sure you dry it first and get the settings dialed in.

My Sunlu TPU Temps: Nozzle = 208C, Bed = 50C

Dried TPU for 8hrs at 55C

For mounting onto Multiboard, I recommend using 2x Folded Big Thread MultiConnect Connectors (or the flush version) with one space in between. For a little extra security you could use a MultiConnect Rail as well.  Then just slide the arm in place. The padding should friction fit, but can be glued in place if needed.   To prevent your MultiBoard tiles from flexing from the weight, make sure you have enough anchor points in the wall and use offset pegs (8mm version) as needed.

I'll be adding more Multboard, Multiconnect, and Gridfinity compatible accessories for various tools, smart home devices, networking devices, and more in the future. Be sure to follow me to keep updated with my releases. Cheers!

Credits and thanks to:
Keep Making/Jonathan for MultiBoard
David D for MultiConnect 

Make Anything for the Guitar Wall Mount Hanger with Flexible Top