Tiny's Sloth Flexible

Tiny's Sloth was printed down to 50%.

Print in place with no support and no assembly required. Just slice and print!
Has been test printed down to 60%.
Pre-painted file also included!

For personal use only!

NOZZLE: 0,4 mm.
LAYER: 0.16 – 0.20
OUTER WALLS: 3
INFILL: 10%
SUPPORTS: NO
Z-HOP: 0.8
BRIM: If necessary

If you would like to sell the prints, please join my Patreon.
https://www.patreon.com/3dtinysprints