Butterflies
Butterflies
Boost
132
214
70
Print Profile(1)
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
55 min
1 plate
Open in Bambu Studio
Boost
132
214
70
12
519
520
Released
Description
These decorative butterflies are easy to print and can be shaped using some hot water if printed in PLA. The first layer is only 0.2mm thick so should be semi-translucent depending on the filament colour used.
Please post pictures if you make these. I'd love to see them in more colours.
Comment & Rating (70)
All
Boosted
Print Profile 2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
They look fine and printed very well.
I just made one little change to make them sit comfortable 😉.
Thanks to the Clothes peg from Tvorim3D (you will find them easily here on makerworld) that I changed into butterfly pegs they sit still and won't fly away anymore.
I had to print a Bunch already as my wife loves them.
The only problem I had was printing a gold and black one. the gold PLA silk sticks that hard at the plate that it was very hard to remove them. But this has absolutely nothing to do with the design.
So: ⭐️⭐️⭐️⭐️⭐️
The designer has replied
1
Reply
Thats a great idea to attach them to a peg!
Thanks for the post and rating!
0
Reply
Boosted
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
Looks amazing!
1
Reply
Thanks for posting and rating!
0
Reply
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
They looked very good on PEO/PEY plate. I also got a heat gun to them and molded the wings as much as I could.
2
Reply
Boosted
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
Super Deko meine Frau druckt diese regelmäßig nach. Sie werden einfach überall bei uns in den Blumen verteilt.
1
Reply
Vielen Dank für die Bewertung des Modells. Ich freue mich zu hören, dass sie Ihrer Frau gefallen.
0
Reply
Printed lovely will be a nice addition to the Christmas tree this year
The designer has replied
1
Reply
Thanks so much for posting the make! I've noticed that selecting "Only one wall on first layer" improves the first layer a bit.
1
Reply
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
very nice file !!!
0
Reply
Looks really good! Thanks for posting!
0
Reply
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
They look fantastic, already started another print in a different colour. My daughter loves them on the wall.
0
Reply
It worked perfectly!
Congrats
0
Reply
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
printed nicely without problems
0
Reply
Print Profile
2-Colors | Arachne | PLA | 0.2mm layer, 2 walls, 100% infill
Turned out great! Printed with Uv filament, the white turns pink when the sun hits it.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld