elliott.scott.r

0.2mm layer, 2 walls, 15% infill

Kelzan

Thanks! Yeah, it's one of my favorites, I have one stuck to the back of my music stand.

You made a great batman logo.  Came out excellent.

Mister_Fatherly

K3DPrint

cover

IMG_9228.jpg

plate_1.webp

IMG_9229.webp

plate_1.png

<ul><li>.2mm layer height</li><li>No support needed</li><li>No brim needed</li><li>2 colors used</li><li>Add 6 8x3mm magnets to the back when done</li></ul>If you don't want the holes for magnets in the back, you can easily delete the generic-cylinder objects in Bambu Studio. This could also be resized for other sized magnets, like 6x3, 6x2 etc.&nbsp;I didn't try it because I was too impatient to wait for it, but I think ironing might work really well here.

IMG_9233.webp

<ul><li>Added Ironing of all top layers. This noticeably flattens out the ridges which are normally left by 3D printing, especially around the rim of the logo. This adds about an hour to the printing process.</li><li>.2mm layer height</li><li>No support needed</li><li>No brim needed</li><li>2 colors used</li><li>Add 6 8x3mm magnets to the back when done</li></ul>If you don't want the holes for magnets in the back, you can easily delete the generic-cylinder objects in Bambu Studio. This could also be resized for other sized magnets, like 6x3, 6x2 etc.

0.2mm layer, 2 walls, 15% infill, Ironing on Top Surface

1989 Batman Emblem

This is a remix of a Batman logo design by bio827 on Thingiverse. I made it 2-colors for AMS printing, and also added six holes in the back sized for 8x3mm magnets. On my print, the magnets were able to slip in snugly without the need for glue.&nbsp;I printed this using yellow and black Bambu Lab PLA, which turned out nice.&nbsp;

Print Profile(2)

Description

Comment & Rating (5)

This remix is based on

License

Related Models

Batman Logo

Batman Batarang Magnet

Batman Hueforge

Hawk Tuah keychain

Batman Logo With Magnets