GamePi

Check out the new version with joysticks: https://www.prusaprinters.org/prints/149804-gamepi-2

This a simple sleek shell to create a raspberry pi based portable game station.

It was designed around a 5" Elecrow Display and a Raspberry Pi 3.

I've added two versions of the shell:

1st: Front and back cover are made from one part (fits fine on a 21x21cm bed)

2nd: Front and back cover are split into 3 parts each (for smaller printers)

For the build shown in the pictures I've use the following parts:

• 5" Display (https://www.amazon.de/gp/product/B013JECYF2)
• Raspberry Pi 3 (https://www.amazon.de/dp/B01CD5VC92)
• microSD Card 64GB (https://www.amazon.de/gp/product/B073SB2L3C)
• Power (Electronics/Batteries) (https://www.amazon.de/gp/product/B00XTVOAQM)
• Stereo Amp 2x1,5W (https://www.ebay.de/itm/271513588858)
• Soft Tactile Switches (https://www.amazon.de/gp/product/B01JD3H5RK)
• Buttons from an old Controller
• 3,5mm switched Stereo Jack
• small 1,5W Speakers from an old notebook
• other small parts and cables

You can leave a tip (button left) if you like my stuff.