Search models, users, collections, and posts
Cloud Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.6 h
1 plate
Open in Bambu Studio
Boost
21
64
2
1
25
5
Released
Description
The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio.
If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used :
- PLA BambuLab Matte Charcoal Transmission Distance: 0.6
- PLA BambuLab Basic Blue Gray Transmission Distance: 3
- PLA PolyTerra Earth Brown Transmission Distance: 0.3
- PLA PolyTerra Pastel Peach Transmission Distance: 3.5
- PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Swap Instructions:
- Start with Charcoal
- At layer #12 (1.04mm) swap to Blue Gray
- At layer #15 (1.28mm) swap to Earth Brown
- At layer #19 (1.6mm) swap to Pastel Peach
- At layer #23 (1.92mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)