Inland Spooless Adapter for Bambu Reusable Spool
Copyright Claim
Inland Spooless Adapter for Bambu Reusable Spool
Boost
32
65
67
Print Profile(2)
PLA, All-New V2 update!
Designer
1.8 h
1 plate
PETG, New V2 Update
Designer
2 h
1 plate
Open in Bambu Studio
Boost
32
65
67
5
149
182
Released
Description
“Inland Spooless Adapter”
For using Inland brand “Spooless” filament with Bambu reusable spools
Bambu spools are 3mm wider than Inland
This adapter prevents filament from getting pinched
ALL-NEW V2 UPDATE!
6/22/24
The BEST Inland adapter is EVEN BETTER!!
- NEW! Both sides are notched for Bambu spool, fits either way!
- NEW! Clearance for either left or right side placement in AMS!
- NEW! Added ribs, tighter fit to cardboard spool!
- NEW! Filament direction does not matter!
- NEW! Filament holes are not blocked!
- NEW! Smaller, 10 grams lighter!
Please boost🚀 , like👍 and rate⭐⭐⭐⭐⭐!
THANK YOU EVERYBODY! 💗
Comment & Rating (67)
All
Print Profile
PLA, All-New V2 update!
It’s in there somewhere I promise and worked great. Thanks so much.
The designer has replied
1
Reply
Great, you're welcome!
0
Reply
Boosted
Print Profile
PLA, All-New V2 update!
perfect fit!
The designer has replied
1
Reply
Awesome! Thank you! 😊
0
Reply
Print Profile
PETG, New V2 Update
It printed as pictured and fits as intended.
(Edited)
The designer has replied
1
Reply
Excellent! 🙂
0
Reply
This printed great and slides on perfectly. However, when I went to change the spool, I couldn't get the cardboard ring off, lol. Any tips for a stuck roll? Freezer maybe?
The designer has replied
1
Reply
Haha, I hold the cardboard and push the adapter off with my thumbs! I was actually considering putting holes in the back to help push the ring off. It's a tight fit because the cardboard doesn't key onto the spool and can only rely on friction. ..The freezer won't work because you'll be freezing the whole thing! 🙂
0
Reply
Replying to @Studio727
If you ever revisit the design, I think holes for pushing would be great. I'm going to try getting a couple scrapers in there and twisting them to push the cardboard out. My idea with the freezer would be that it might slightly shrink the plastic enough to let the cardboard slide off. It's pretty hot in that room, so that might be the problem.
0
Reply
Replying to @Bondfire
It should be tight but not impossible, that's weird.. Was it that hard to get the spool on?
0
Reply
Print Profile
PLA, All-New V2 update!
printed well, but I find that is doesn't hold a snug connection and slowly comes loose as printing, resulting in filament load errors.
The designer has replied
1
Reply
This model is actually designed to be very snug. If it came loose your spool may not be functioning correctly..
0
Reply
can't help cardboard not functioning right lol. good product, just not for me I guess.
0
Reply
Print Profile
PLA, All-New V2 update!
This was a life saver. I was looking to save a few bucks by buying the spoolless rolls from Micro Center. I noticed they didn't fit very snuggly on the normal spool. printed this out and worked like a champ.
The designer has replied
2
Reply
Awesome! Glad it works for you! 😊
0
Reply
petg adapter won’t let spool lock
The designer has replied
1
Reply
Is the tab on the Bambu spool in the notch on the adapter?
0
Reply
Print Profile
PLA, All-New V2 update!
These seem to be the only ones that actually work for inland Spooless material.
The designer has replied
1
Reply
Yeah man, Inland spools are 3mm skinnier than Bambu. Glad you found it! 👍
0
Reply
Print Profile
PLA, All-New V2 update!
Fit my Inland refill perfectly. Super easy to use!
The designer has replied
1
Reply
Awesome, glad I could help! 😁
0
Reply
Boosted
everyone needs to know - this is the only adapter for inland refills that has the proper gap so that the filament doesn’t unwind into the space between itself and the spool wall. that is CRITICAL! this is the one to print y’all!
The designer has replied
1
Reply
Thank you so much! That's precisely the issue with other adapters out there. I wish there was a better way but as you said it's critical your filament doesn't get pinched. I appreciate the comments and boost! 💗
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld