Mounting Bolts hex-head for Underware/Multiboard
Print Profile(1)
Description
Sometimes a bolt is the easiest way to attach anything with a 7mm or larger hole to the multiboard.
These were created by reverse engineering the multiboard thread (done by David D https://www.printables.com/model/709777-multiboard-screwbolt-step-files-for-modeling-and-d) . They fit better than the official T-bolts from multiboard, as the clearance is smaller.
The heads can be screwed with a ½ socket wrench or by hand.
There are two variants: one with a hole (for an M3 screw). The hole by itself provides additional strength to the bolt, but you can use a screw through is you really want to attach something very heavy (in my tests, the ones with the holes can hold 5 kg easily, I have not tested the ones without).
If you are concerned about their strength, I have also uploaded a split version: https://makerworld.com/en/models/769516#profileId-705168
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)