Christmas trees (tealight compatible) by SabreDesign

SabreDesign

Household>Festivities

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Short tree, Vasemode, 0.2mm variable layer

Designer

2.3 h

1 plate

5.0(515)

Tall tree, Vasemode, 0.2mm variable layer

Designer

2.8 h

1 plate

4.9(417)

Small Tree - Fits Tealight

1.3 h

1 plate

5.0(73)

Short Tree - 0.12mm layer, 1 walls, 0% infill

2.2 h

1 plate

5.0(44)

Click to see more

Open in Bambu Studio

Boost

2025

4832

1164

1.2 k

7.4 k

5 k

Released

Description

Modern christmas tree ornaments for vase mode printing. Tall tree is 174mm tall and short tree 132mm and both have a 62mm opening for the bambulab remote controlled puck lights or an electronic tealight. Designed for vasemode printing. Profiles are tuned to get a good print quality with variable layer heights. When using translucent filament you can use a light to light up the tree. Model is compatible with Bambulab LED Flame Tea Light Candle Set and remote controlled puck light.

When slicing yourself and using larger layer heights there may be gaps in the print because of the steep curvature on the model. Thus it is recommended to use 0.20 mm overall layer height with lower variable layer heights on the tip and the top curvatures of each section of the tree.

If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign

For one time support you can also buy me a coffe here: https://buymeacoffee.com/sabredesign

Boost Me (for free)

Check out more of my designs below and on my profile:

Bill of Materials

Maker’s Supply Kits and Parts

Remote Controlled 16-color RGBW Puck Lights - KC007

$6.99 USD

B-KC007

× 1

Halloween Pumpkin Light - DY012

$9.99 USD

B-DY012

× 1

Bambu Filaments

Iridium Gold Metallic

A02-Y1-1.75-1000-SPL

× 1

Buy Now

Download BOM

Comment & Rating (1164)

@TachyPrints

Boosted

Print Profile

Small Tree - Fits Tealight

Printed very well, however any recommendation for improving the very tip of it?

The designer has replied

@user_1947069858

Looks really good. Can I know which filament colors you use for these 3 trees? Thank you!

@TachyPrints

Boosted

Replying to @user_1947069858 :

Yeah sure it's elegoo brown, eryone olive green and elegoo matte beige

@bd142

I just clipped the sharp top off with my pliers and tried to round it off a little. worked for me!

@3D_build

Hello, there is an issue with the angles of the file, resulting in tiny holes, a shame it isn't a little more refined as the model is relatively good I am far from a novice in 3D printing and due to the spiral nature it's impossible to print this file without these holes I've attached photos

(Edited)

The designer has replied

Show original

@SabreDesign

You can decrease the layerheight for these sections. For my test prints there were no holes, I used the standard profiles.

@3D_build

Replying to @SabreDesign :

Nevertheless, this is indeed the case, regardless of the layer height (adaptive and spiderweb), especially since it was tested with your print settings Closer inspection of the photos posted in the comments on your design clearly shows them, less so on some because the color accentuates or diminishes the visual effect Slightly increasing the thickness of these areas in your design could likely resolve the issue I privately sell custom designs, requiring perfectly calibrated filament, I had a professional acquaintance test it on an Ultimaker S5 pro with the same result

(Edited)

Show original

@DeSa

Boosted

Replying to @SabreDesign :

It is actually strange, I once printed with Esun PLA+ without holes, today I printed again with Bambulab PLA, this time the same holes ... I did not change the parameters.

@mrdjmr

Simply Beautiful!! Congratulations!

Show original

@Krome

Boosted

Beautiful!! congratulations!! 😎

@Drado73

Boosted

What a clean finish! Absolutely loved this print!

@DeSa

Boosted

What type of filament did you use?

@Drado73

Boosted

Replying to @DeSa :

@DeSa Hello! QIDI TECH PLA Rapido Grey 1.75mm

Show original

@user_2625639931

Print Profile

Tall tree, Vasemode, 0.2mm variable layer

beautiful print and works great with the tea light

@captainallergy

hey looks awesome! Is the tealight somewhat connected with the tree or do you just put the tree above the tealight?

@BluePhi09

Boosted

Print Profile

Short tree, Vasemode, 0.2mm variable layer

It looks absolutely stunning

Show original

@creative_maker

Boosted

Thanks again for this nice tree! I also featured it in the video about wooden filaments - https://youtu.be/NK7JzLaM0iU. Attached some details from prints with wooden filaments - really an eye-catcher!

The designer has replied

@SabreDesign

awesome video! thank you for featuring the designs. I actually started to play around with the bambu wood filament today and it looks pretty good so far.

@LBI3Dmail

Boosted

Print Profile

Small Tree - Fits Tealight

It prints flawlessly in vase mode

Show original

@snoprox440

Boosted

Print Profile

Small Tree - Fits Tealight

made with bambu pla slik silver

@panddromas

Print Profile

Tall tree, Vasemode, 0.2mm variable layer

@JonHoule

What filament and colour is that?

@panddromas

Replying to @JonHoule :

Full name from amazon listing: kexcelled Matte PLA Filament 1.75 mm +/- 0.03 mm, Gloss-Free Colour, Matt Texture, 3D Printer Filament, 1 kg Spool (2.2 lbs), Suitable for Most FDM Printers, Tidy Winding, White manufacturer’s series name: k5 PLA M

(Edited)

@JonHoule

Replying to @panddromas :

it’s a wicked colour! cheers!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(6)

Description

Bill of Materials

Comment & Rating (1164)

License

Related Models

Christmas tree earrings

Plant support in tree look

Modern Christmas Tree Tealight Lantern Set

Bridge wooden train - brio compatible