Espresso Puck Screen Caddy (1, 2, & 3 Slot, 58mm)
Print Profile(6)
Description
Espresso Puck Screen Caddy (Single, Double, & Triple Slot - 58mm)
If you don't like the angular shape of this one, please check out my Mk.2 Puck Screen Caddy
Keep your puck screens organized and off your countertop using the Espresso Puck Screen Caddy. The Caddy will hold an espresso puck screen up to 59mm (slots are 60mm x 4mm) in diameter and sits on the upper rail or lip of many home espresso machines. The Caddy features an open bottom to ensure no pooling of water and to allow the puck screen to dry fully between uses. The puck screen will sit just above the top of the machine making it easy to grab without ruining the aesthetic of your machine or getting in the way. The Caddy comes in three versions and print profiles are included for both PLA and PETG so select the right one for your needs!
This was designed specifically for a Profitec GO, but should work for a variety of home prosumer level machines. Machines with wider rails or wire rails may need the model tweaked slightly. For reference, the rim of the Profitec GO is 2.6mm thick and the holder slot is about 3mm.
Feedback welcome! Let me know if you'd like a version with modifications.
Check out my other prints by clicking the images below:
Please also see my RDT Spray Bottle Holder
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)