Santa Workshop (DIY)

Santa Workshop

With this print you can put together your own Santa Claus scene. It consists of a base plate and insert figures and is easy to print. Put it together according to your own imagination and add lighting to finish it off or decorate it further with snow and moss.

Base plate:
You can choose from 2 plates. One with holes for lighting and 1 where you can punch out the holes yourself.

Insert figures:
I have already made quite a few figures to make fun scenes. Please note: some figures are fragile so be careful when inserting them.
It is also easy to mirror figures. Select the figure and mirror it over the x-axis in the slicer.

Lighting:
In this example I used fairy lights (10 LEDs, 1 meter, warm classic). In the photos you can see how I attach these. I glued the LEDs to the back. But of course you can also make your own lighting plan. Because the figures are almost as thin as lithophanes, you can also work with a light source on the back or at the bottom.

DIY:
you can also make 2d figures yourself. On the second printed board I placed a standard plug for the base plate. The dimensions are 20x7x2 mm

If you have any questions or requests, please let me know via the chat.