Search models, users, collections, and posts
Matrix Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
4 h
1 plate
Open in Bambu Studio
Boost
295
855
41
26
593
279
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 203.4x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA Sunlu Green Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Green
At layer #15 (1.28mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (41)