180° Brio Uphill Track (2 Parts) by Printerchen

Printerchen

Toys & Games>Other Toys & Games

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 4 walls, 15% infill

Designer

5.7 h

1 plate

5.0(11)

Reverse Part 0.16mm layer, 4 walls, 15% infill

Designer

5.7 h

1 plate

3.0(2)

Boost

101

Released

Description

About the design

I designed my own 180° Uphill Track that fixes two issues I had with the track from Cannela Verde: The Angle is wider, so the trains, even three-axle trains, fit better on the track, even electric trains are able to climb the slope. The second fixed issue: the height is now compatible to Brio bridges.

To achieve that I split the track into two parts, so they will fit on my printers bed. The parts can be easily plugged together and also separated again after playing (for better storing).

There is also a Tree Part Version (for smaller Printers, or even better storing).

Printing

I recommend to print it in at least 0,16mm to have a smooth surface on the top. You can combine the infill and select "adaptive cubic" as Infill pattern to save time and material.

See the track in action

Comment & Rating (19)

@ozskeeter

Print Profile

0.16mm layer, 4 walls, 15% infill

just need the opposite connector pairing for a downhill slope

The designer has replied

@Printerchen

Hey @OzSkeeter, thats a great idea. I added a second model with an Reverse Print Profile to this model. I haven't printed it yet, all my printers are occupied right now 😅. I would appreciate feedback.

(Edited)

@ozskeeter

Replying to @Printerchen :

Thankyou!! 🙏🥰

@Papadansmaman

Print Profile

0.16mm layer, 4 walls, 15% infill

Perfect height to fit on standard bridge and the track size is on point! Can be great if you can upload the Mirror version! :) Thank you!

The designer has replied

@Printerchen

Thanks for the feedback, you can use the mirror function in Bambu Studio: Right click on the model -> Mirror -> Mirror along X-Axis. Dont forget to mirror both models.

@user_3243730667

Print Profile

0.16mm layer, 4 walls, 15% infill

Works with Brio!

@ozskeeter

Print Profile

Reverse Part 0.16mm layer, 4 walls, 15% infill

Thankyou for adding this “downhill” profile, greatly appreciated 🥰🙏. This print was triggered via Handy app … profile settings perfect for “remote printing” on an X1C. My toddler grandson will be delighted.