Rummy kub full size
Print Profile(1)

Description
We play this game very often and with great pleasure with the entire family (4 people). Our old Rummy game is already over 30 years old, the tiles were made of cardboard (partly swollen and bent), the tile holders were made of thin thermoformed plastic (partly broken and cracked), and the box was also made of cardboard (repaired with adhesive tape).
For these reasons, it was time for a new game.
The tiles and holders had to be about the same full size, as we were already very happy with them. A mini or travel size was out of the question for us.
There are already many, including very nice Rummy print templates. But unfortunately, we couldn't find a template that would suit our frequent use of the game.
It needed to be robust without requiring too much filament.
The holders, the box, and the lid are printed diagonally in the print space with support in order to achieve the maximum printable size (without having to glue, screw, or plug anything together).
The numbers on the tiles should be printed twice so that there is no overhead.
It should be easy to put away, just hold the box on the edge of the table and slide the tiles in without having to sort or align them.
The game should not take up too much space when packed together. The holders are simply placed on top of each other and the box with the tiles and closed lid is simply placed on top.
Conclusion:
- We have played with this new printed version many times, and it works very well for us.
- Quick preparation / assembly
- Full size
- Robust design
- Numbers are printed twice so that there is no overhead
- It can be put away again quickly and easily
- The holder and the tile box are simply placed on top of each other
- Does not take up much space in the cupboard.
Rules of the game:
There are various, slightly different rules of the game. We always play according to the following rules:
2-4 players
108 tiles, four colors, one joker per color and two tiles 1, 2, 3, 4, ...13.
Each tile has the value of the number printed on it.
A joker is worth 25 points.
To be able to play the first time, you must play at least 40 points without touching any tiles that have already been played.
You must always play at least 3 tiles in a row from any position in the entire row, 1 to 13, or three to four identical numbers of different colors.
If you have already played the first time, you can also place a single tile on a row that has already been played.
When it is your turn, you can also rearrange tiles that have already been placed. However, there must always be matching rows of at least 3 tiles and at least one of your own tiles must also be placed.
If it is your turn and you cannot place anything, you must move a tile.
The first player to place all their tiles wins.
To match these tile holders and the box, there is also a DOMINO game with a matching box lid, which can be found at https://makerworld.com/en/models/796912.
----------
(German)
Wir spielen dieses Spiel sehr oft und sehr gerne mit der ganzen Familie (4 Personen). Unser altes Rummy Spiel ist schon über 30 Jahre alt, die Steine waren aus Pappe (teilweise aufgequollen und geknickt), die Steinehalter / Steineständer aus dünnen tiefgezogenen Kunststoff (teilweise kaputtgebrochen und mit Rissen) und die Box ebenfalls aus Pappe (wurde mit Klebestreifen repariert).
Aus diesen Gründen war es an der Zeit für ein neues Spiel.
Die Steine und Halter sollten in etwa die gleiche vollwertige Größe haben, da wir damit schon sehr zufrieden waren. Eine Mini- oder Reisegröße kam für uns nicht in Frage.
Es gibt bereits viele und darunter auch sehr schöne Rummy Druckvorlagen. Doch leider haben wir keine Vorlage gefunden, die für unseren häufigen Spielgebrauch passen.
Es sollte robust sein, ohne zu viel Filament zu benötigen.
Die Halter, die Box und der Deckel werden diagonal im Druckraum mit support gedruckt, um die maximale, druckbare Größe zu realisieren (ohne das etwas geklebt, geschraubt oder zusammengesteckt werden muss).
Die Zahlen auf den Spielsteinen sollten doppelt drauf gedruckt sein, so dass es kein überkopf gibt.
Es sollte leicht wegzuräumen sein, einfach die Box an die Tischkante halten und die Steine hineinschieben, ohne dass man diese erst noch sortieren oder ausrichten muss.
Das Spiel sollte im zusammengepackten Zustand nicht unnötig viel Platz wegnehmen. Die Halter werden einfach aufeinander gesteckt und die Box mit den Steinen und zugeschobenen Deckel einfach obendrauf gesetzt.
Fazit:
Wir haben mit dieser neuen gedruckten Variante schon oft gespielt und es passt für uns sehr gut.
- Schnelles Vorbereiten / Aufbauen
- Vollwertige Größe
- Robuste Ausführung
- Zahlen sind doppelt draufgedruckt, so dass es kein überkopf gibt
- Es kann einfach und schnell wieder wegräumt werden
- Die Halter und die Steinebox werden einfach aufeinander gesteckt
- Benötigt nicht viel Platz im Schrank.
Spielregeln:
Es gibt verschiedene, leicht abweichende Spielregeln. Wir spielen immer nach den folgenden Spielregeln:
2-4 Spieler
108 Spielsteine, vier Farben, je Farbe ein Joker und zwei Steine 1, 2, 3, 4, …13.
Jeder Spielstein hat den Wert der darauf gedruckten Zahl.
Ein Joker ist 25 Punkte wert.
Um das erste Mal ausspielen zu können muss man mindestens 40 Punkte ausspielen, ohne an bereits ausgespielten Steinen anzulegen.
Es müssen immer mindestens 3 Steine in Folge aus einer beliebigen Stelle der gesamten Reihe, 1 bis 13 , oder drei bis vier gleiche Zahlen mit unterschiedlichen Farben gelegt werden.
Wenn man schon das erste Mal ausgespielt hat, kann man auch einen einzelnen Stein an einer bereits ausgelegten Reihe anlegen.
Wenn man an der Reihe ist kann man auch bereits abgelegte Steine umsortieren. Es müssen aber immer wieder passende Reihen mit jeweils mindestens 3 Steinen liegen und mindestens ein eigener Stein zusätzlich mit abgelegt werden.
Wenn man an der Reihe ist und nichts legen kann, muss man ein Stein ziehen.
Wer zuerst alle seine Steine ablegen kann, hat gewonnen.
Passend zu diesen Steine-Haltern und der Box, gibt es auch ein DOMINO Spiel und passenden Box-Deckel unter https://makerworld.com/en/models/796912.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
























Comment & Rating (10)