OUTDATED DESIGN !!!
I recommend to print the uni-X Wade instead http://www.thingiverse.com/thing:25416
I was always wondering why there are so much different Wade`s and never knew exactly which one is the right one to print.
Therefore i tried to make one Wade that will fit (nearly) all Mounting plates and hotends.
The insert hole dimension is d=16,7mm height = 20mm
The Wade itself is designed to work with 3mm ABS/PLA, if you want to print with 1,75mm material just buy a small brasstube (d=2,1mm D=3mm) and put it between the hobbedbolt and the hotend.
The inserts are made d=16,4mm height= 19,9mm
if there are some dimensions wrong or some weak points please tell me and i will try to fix them.
EDIT3: New V2 Uploaded. (13.05.2012)
Fixes:
Just print the whole Wade and the Insert of your choice.
Mounting holes are for:
Std Mendel/Prusa 50mm ?!?!
Orca V 0.20 ? 0.30 and 0.40 (will not fit v42, has already an geared extruder )
If you want to add a coolingfan on Orca v.040 you have to mount the wade straight which requires an additional hole at the carrier plate.
Hotends that should fit: