Hanging Hot Air Balloon - No Supports

Copyright Claim

Hanging Hot Air Balloon - No Supports

Boost
354
600
140

Print Profile(5)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

Basket, PLA, 0.16 mm layer, 2 walls, 15% infill, no support, A1 Mini or larger
Basket, PLA, 0.16 mm layer, 2 walls, 15% infill, no support, A1 Mini or larger
1.4 h
1 plate
4.9(34)

Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
1.4 h
1 plate
4.9(36)

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
55 min
1 plate
5.0(19)

6 colors on 3 plates, PLA, 0.16 mm layer, 2 walls, 15% infill, A1/P1/X1
6 colors on 3 plates, PLA, 0.16 mm layer, 2 walls, 15% infill, A1/P1/X1
6.8 h
3 plates
5.0(12)
Click to see more

Open in Bambu Studio
Boost
354
600
140
54
600
465
Released

Description

Think I'm Awesome? ~  https://buymeacoffee.com/triplegworkshop 

NO Supports! 9 pieces screw together to form this colorful model. Smooth cap also included.

Should all fit together smoothly. Cap goes on last and holds everything together.

Comment & Rating (140)

Please fill in your opinion
(0/5000)

Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
Absolutely brilliant print. Printed one in 100% and two in 50% 100% was printet with 0.6 nozzle with 0.24 layer lines. Easy assembly! 50% was printet with 0.4 nozzle with 0.16 layer lines. Assemble was a bit harder to get it all screwed together for a snug fit.
The designer has replied
1
Reply
I did not think it would survive 50%!
0
Reply
Lovely🎈🪂
0
Reply
Replying to @TripleGWorkshop :
It is a bambu, nothing holding it back. 😍 I did use some PLA+ for the screw parts. Not so sure how big of a difference it does in strength, but I was able to put it in a vise and slowly thread the cap on the "screw" without anything breaking.
(Edited)
0
Reply
Love the print. Thank you!
3
Reply
Looks also great in 200% 😀
1
Reply
Massive!
0
Reply
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
the print is top heavy & baskethas someweak points, cute idea
The designer has replied
0
Reply
what do you mean by heavy? it should be rigid. 🎈
0
Reply
Replying to @3DJupp :
I know it hangs but I tried to stand it up and it fell over.
0
Reply
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
Printed the 6 balloon segments with a rainbow silk filament, then the hardware and basket with basic PLA. Everything printed beautifully on the first try!
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed Great! Thank you for sharing.
0
Reply
Print Profile
6 colors on 3 plates, PLA, 0.16 mm layer, 2 walls, 15% infill, A1/P1/X1
Great model! Thanks for sharing!
0
Reply
Print Profile
Ballon Fragment (Print 6x), PLA, 0.16 mm layer, 2 walls, 15% infill, A1 Mini or larger
turned out lovely...
0
Reply
This is a fantastic design, and the assembly process was smooth! The balloon looks amazing once put together. However, the basket connections are quite fragile—I’ve dropped it a few times and had to reprint the basket multiple times. Despite this, it’s a beautiful model with great attention to detail!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
During assembly, avoid placing any weight on the basket, as the thin struts are prone to breakage. Otherwise, a truly delightful model, perfect for presenting a hot air balloon ride voucher (birthday gift)
Show original
0
Reply