AMS Helper - New height, improved side

Remixed by

AMS Helper - New height, improved side

Remixed by
Boost
54
101
47

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

Strength profile, 0.2mm layer, 6 walls, 20% infill gyroid
Strength profile, 0.2mm layer, 6 walls, 20% infill gyroid
Designer
2.3 h
1 plate
4.7(19)

All PLA AMS; 0.2mm layer, 6 walls, 20% infill
All PLA AMS; 0.2mm layer, 6 walls, 20% infill
Designer
2.6 h
1 plate
4.0(3)

Single color, PLA; 0.2mm layer, 6 walls, 20% infill
Single color, PLA; 0.2mm layer, 6 walls, 20% infill
Designer
2.2 h
1 plate
5.0(1)

Boost
54
101
47
0
244
175
Released

Description

Remix of AMS Helper

by papsjundi - https://makerworld.com/en/models/41406#profileId-41677

  • Lower height for newer AMS devices
  • Added side walls
  • Intended for pins size: d 4 mm x 24 mm
  • Added option for d 4 x 25 mm pin in raw files
  • Added small fixation rib for additional holding force

Comment & Rating (47)

Please fill in your opinion
(0/5000)

anyone have trouble printing this. my p1s has been having trouble with the color change and now its layer shifting
The designer has replied
1
Reply
Hey, check temps and materials in the color change. Maybe bad tension in belt? Let us know what was your problem.
0
Reply
I didn't try it again. the layer shift was the last time I printed it.
0
Reply
so I had the same issue, turns out if you use the raw file it doesn't work. Just download the normal version and go through the layers in the preview tab to ensure that it's not trying to print in mid air. Mine was printing the whole thing, then stopped printing the main body for like 10 layers, then went back and tried to print in midair
0
Reply
They keep falling back for some reason? Any idea why they dont latch on properly?
The designer has replied
0
Reply
Probably tolerance to big for your AMS. As the design is not perfect, the easiest solution would be adding small amount of hot glue (it can be easily removed, if needed). Let me know what worked for you.
(Edited)
0
Reply
Replying to @MrBlister :
I'm getting the same issue. Going to try printing scaled up a bit.
0
Reply
According to your pics this is not printed from my files, due to no sides skirts? :) Tolerances may be the issue, try hot glue.
0
Reply
Print Profile
Strength profile, 0.2mm layer, 6 walls, 20% infill gyroid
this height is perfect 👍👍
The designer has replied
0
Reply
Thanks for the feedback and rating!
0
Reply
Great tweak to the design. The improved side help keep the filament on those poorly wound spools where it belongs. Used a piece of PTFE bowden tube in place of the stainless steel rod. Fits perfect!
The designer has replied
0
Reply
Thanks for the feedback! Happy to hear that PTFE tube fits well.
0
Reply
Print Profile
Strength profile, 0.2mm layer, 6 walls, 20% infill gyroid
Can't wait to test it.
0
Reply
Print Profile
Single color, PLA; 0.2mm layer, 6 walls, 20% infill
Perfect. Thumbs up!
0
Reply
Print Profile
Strength profile, 0.2mm layer, 6 walls, 20% infill gyroid
Excellent print file, I opted for ABS and they came out very well. Thank you
0
Reply
Print Profile
Strength profile, 0.2mm layer, 6 walls, 20% infill gyroid
Nice improvement, thanks for sharing!
0
Reply
would it be possible to change it slightly so that pins with a diameter of 4mm x 25mm would fit?
The designer has replied
1
Reply
Hey, yes definitely. I will prepare raw file for the 25 mm.. Will notify you in this comment 😊 Cheers
0
Reply
You can find remix for 25 mm pin in the raw files.
0
Reply
I do have 25mm version in the files, if you need it.
0
Reply
these do not work with full sunlu rolls unfortunately
The designer has replied
0
Reply
Sorry to hear that, can you attach picture? Is desing too high?
0
Reply