Kitchen towel holder curved by jrmusan

jrmusan

Household>Other House Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

STRONGER - 0.2mm layer, 6 walls, 25% infill

Designer

57 min

1 plate

4.7(18)

0.2mm layer, 6 walls, 25% infill

Designer

56 min

1 plate

4.3(31)

Open in Bambu Studio

Boost

400

965

622

400

Released

Description

My other model https://makerworld.com/en/models/628524#profileId-558993 was pretty popular so I decided to make a more user friendly version! This version is much easier to put the towel into. I've found myself struggling to get it in sometimes and thus this nice rounded holder was born.

I didn't feel like buying one of those towel hook things so I made one myself. Super useful and fits my cabinet (19.5mm thick) perfectly, you may find you have to scale it up or down to get it to fit yours correctly.

Printed at 60% infill in PLA (My wife has broke two somehow still but I haven't yet)

Supports: Yes

Comment & Rating (61)

@UglyTaco

Boosted

On the left side you will see my own remix from a previous version of this towel holder. I really like this new round design. Edit* the edges are rough, would be perfect if they can be more round.

(Edited)

The designer has replied

@jrmusan

Nice that looks a lot more sturdy! Thanks for the support <3

@jrmusan

Which edges would you like to see more rounded?

@mout

Print Profile

0.2mm layer, 6 walls, 25% infill

More than satisfactory

Show original

@rramerongen

Print Profile

0.2mm layer, 6 walls, 25% infill

Strength Issue:both sides that connect to the handle itself broken

The designer has replied

@jrmusan

Thanks for the response, I’ve got a new version I’m fixing to upload which extends out that piece an extra 1mm which helps significantly with the strength.

@cfwwj860

Print Profile

0.2mm layer, 6 walls, 25% infill

@user_945602723

Print Profile

STRONGER - 0.2mm layer, 6 walls, 25% infill

Looks great but unfortunately the bridge for the clip onto the door is very thin and breaks easily (to get past the door gap I guess), using a stronger material than PLA is probably a good idea but I'm not sure if will help.

The designer has replied

@jrmusan

thanks for the response, did you try the stronger profile? i did a couple things to make the model a bit stronger and re uploaded it

@user_962201574

Print Profile

0.2mm layer, 6 walls, 25% infill

doesn't work for all my doors only 1s that are flat on back side. or I'd have them everywhere. lol

The designer has replied

@jrmusan

haha that’s a shame, yeah just the other day I realized I could put one in my bathroom too.

@user_3949665943

I like the idea. if can make it to where it don’t break that would be awesome

The designer has replied

@jrmusan

Thanks, I added a stronger one just a bit ago. Might work better for you.

@ynga

Print Profile

0.2mm layer, 6 walls, 25% infill

Fantastic fit on my cupboard, great size. We are going to make a wider one and print that too. Thanks!

@leipekennie

Print Profile

0.2mm layer, 6 walls, 25% infill

to small for towels.

The designer has replied

@jrmusan

I'll look into making a bigger one (:

@user_3104272875

Print Profile

0.2mm layer, 6 walls, 25% infill

Excellent print, doesn't quite fit my kitchen because it's round, but otherwise very good

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (61)

License

Related Models

Kitchen towel holder

Paper Towel Holder

Kitchen Cabinet Towel Holder

Kitchen towel holder