Long Chain

It´s a simple chain i created for a cosplay project. As it´s a bit of work to place them in such a way on a printbed, i though someone would appreciate if someone already did it for them ^^

The chain is made of 93 individual Parts, that´ll get you almost 2 meters in total lenght

(That´s about 78 inch if i´m not mistaken).

Each chain link is 30mm x 18mm x 4mm in size (1.18 x 0.71x 0.16 inch).

Be aware that the links have a six sided profile, for better printbed adhesion.

The chain can be printed in place on the printbed of a P1P/P1S/X1 with a bit of spare room on each side.

If you want to use smaller printbeds, the outer measures of the looped chain (without supports) is 228mm x 223mm x 16mm (8.97 x 8.78 x 0.63 inch).

If you need smaller outer measures or just want a shorter chain, Bambu Studio is capable to sepparate the chain into individual links, so you can remove individual parts, to shorten the chain.