Polymaker Adapter Spool Weight - Bambu Edition by SpannMagoo

SpannMagoo

3D Printer>3D Printer Accessories

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 80% infill (Full)

Designer

2.6 h

1 plate

4.8(4)

No Logo Full-0.2mm layer, 4 walls, 80% infill

Designer

2.4 h

1 plate

5.0(2)

0.2mm layer, 4 walls, 80% infill (Main Body)

Designer

2.1 h

1 plate

0.2mm layer, 4 walls, 80% infill (Cap)

Designer

40 min

1 plate

Click to see more

Open in Bambu Studio

Boost

Released

Description

Polymaker Adapter Spool Weight - Bambu Edition

Are you tired of your spool hopping around when its about to run out? If you said yes, this spool weight is for you. I created this for those of us who have spools that hop around or simply will not rewind because they get too light. This was purpose built to work with the Polymaker Spool Adapter found here. When printed at the recommended 80% infill, 0.2mm layer height, 4 walls, 4 Top and Bottom, it should be around 163g in weight.

Example was printed with Polymaker PolyTerra Charcoal Black and Bambu Green

Note: There is a no logo version now in the raw files and in the profiles

Disclaimer: I am in no way affiliated with Bambu Lab and only used the logo as a way to show appreciation for such a wonderful company.

Comment & Rating (8)

@richbogie

Print Profile

No Logo Full-0.2mm layer, 4 walls, 80% infill

Printed perfectly on the P1P and P1S so far. I'm printing these in bulk to use with polylite PLA Pro. They fit very well.

@ozenz3D

Print Profile

No Logo Full-0.2mm layer, 4 walls, 80% infill

perfect thanks !

@DustyKnuckles

Print Profile

0.2mm layer, 4 walls, 80% infill (Full)

works great… except slightly to wide to fit through center hole of Polymaker “official” cardboard spool ring

The designer has replied

@SpannMagoo

Its not supposed to loose, but it also shouldn't be too tight. I printed 20 of these with PLA, PLA Pro and Polyterra PLA. All Polymaker filaments. Can I ask what filaments you used and if you use the profile settings? I don't want to assume.

@DustyKnuckles

I also used Polymaker filaments with your profile…although I used a different printer for my rings and may be a little oversized, IDK?