Toothless

Boost Me (for free)

This is for learning and communication only, strictly prohibited for commercial use. After pulling in the model, you can directly print with supports at 0.16m by default, or print according to the parameters below or adjust the angle to print. This material does not upload photocuring and dismantling versions, if you need it, you can contact me for it. If there are too many people, I will directly upload it for sharing. The base view uses an elliptical base. I feel it is too ordinary and has been changed to the current base. The current base is larger. If you place one alone, it is recommended to reduce or increase the size of the dinosaur model. Toothless ☆ Lived in North America and Europe in the Late Cretaceous period, about 70 million to 65 million years ago Wingspan: 6m, Weight: 20kg (Information comes from Douyin Encyclopedia and Baidu Encyclopedia) Printing configuration is as follows (all of my works use these parameters): Layer height: 0.12-0.16mm First layer: 0.3mm Seam: Align, outline and holes Strength 3 layers, top concentric Density 10 lines Combine infill Speed first layer 30 Supports: Automatic organic trees First layer extension 5mm Top z distance 0.1-0.14, bottom z distance 0.16 Top contact layer 4, bottom 3, concentric circle structure, xy spacing 0.5mm I beg you to help me!!!