Secret Hitler Board Game by JungyBrungy

JungyBrungy

Toys & Games>Board Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

57.3 h

12 plates

5.0(6)

Open in Bambu Studio

Boost

754

1661

608

Released

Description

12/2/2024 Update:

- Increased tolerance on the placards for easier installation of the legs

- Updated print profile to add additional holes for magnets on the boards with increased tolerance

I wanted a 3D printable version of the Secret Hitler board game that stayed true to the original design, so I created this set using the game’s original artwork, with all components fitting neatly into a compact box.

Each card has front and back artwork and there are 10 unique secret role cards. In the original game there are three different Fascist boards each used for different player counts, but for my version I designed two add-on modifier pieces for the Fascist board, which you can easily place on top the board for 7-8 and 9-10 player games.

Note: Magnets are required for the Liberal and Fascist boards to attach the halves, and envelopes are needed for the secret roles. Links are provided below.

For best results use a 0.2 mm nozzle, but everything can be printed with a 0.4 mm nozzle as well. (Pictured printed with 0.4mm nozzle: Ballot cards, Secret Role cards, Party Membership cards, President and Chancellor placards, Discard & Draw placeholders, and the Game Box. Pictured printed with 0.2mm nozzle: Liberal board, Fascist board, Fascist board mods, and Policy cards.)

Contents:

Liberal Board
- Bambu PLA Matte Dark Blue
- Bambu PLA Basic Cyan
- Creality PLA Silk Silver
- Bambu PLA Basic Black
Fascist Board
- Bambu PLA Matte Scarlet Red
- Elegoo PLA Pro Burgundy Red
- Creality PLA Silk Gold
- Bambu PLA Basic Black
Fascist Board 7-8 Player Modifier
- Bambu PLA Matte Scarlet Red
- Elegoo PLA Pro Burgundy Red
- Creality PLA Silk Gold
Fascist Board 9-10 Player Modifier
- Bambu PLA Matte Scarlet Red
- Elegoo PLA Pro Burgundy Red
- Creality PLA Silk Gold
President Placard
- Bambu PLA Matte Dark Brown
- Bambu PLA Basic Jade White
Chancellor Placard
- Bambu PLA Matte Dark Brown
- Bambu PLA Basic Jade White
Ja! Ballot Card (10)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Dark Blue
- Bambu PLA Basic Black
Nein Ballot Card (10)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Dark Red
- Bambu PLA Basic Black
Liberal Policy Card (6)
- Overture PLA Matte Light Brown
- Bambu PLA Basic Cyan
- Bambu PLA Basic Black
Fascist Policy Card (11)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Scarlet Red
- Bambu PLA Basic Black
Liberal Party Membership Card (6)
- Overture PLA Matte Light Brown
- Bambu PLA Basic Cyan
- Bambu PLA Basic Black
Fascist Party Membership Card (4)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Scarlet Red
- Bambu PLA Basic Black
10 Unique Secret Roll Cards (3 Fascists, 6 Liberals, 1 Hitler)
- Overture PLA Matte Light Brown
- Bambu PLA Basic Cyan (Liberals)
- Bambu PLA Matte Scarlet Red (Fascists & Hitler)
- Bambu PLA Basic Black
Draw and Discard Pile Placeholders
- Overture PLA Matte Light Brown
- Bambu PLA Basic Black
Election Tracker
- Bambu PLA Matte Dark Blue
Game Box & Lid
- Bambu PLA Matte Dark Red
- Bambu PLA Basic Black

Magnets - 3mm x 2mm (8 needed):

https://www.amazon.com/dp/B0B5GGSK3F?ref=ppx_yo2ov_dt_b_fed_asin_title

Envelopes - 2.25" x 3.5" (10 needed):

https://www.amazon.com/dp/B087D84F2J?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Rules link:

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.secrethitler.com/assets/Secret_Hitler_Rules.pdf

Note: The print profile includes snug supports only required for the lid grooves of the game box, which can be removed with tweezers, you can turn off supports for everything else. This design ensures the lid fits securely.

Tip: Matte colors work best due to the dual-sided cards and the low profile nature of the pieces, they will give the best coverage so you don’t see through the parts.

Credit to the creators Goat, Wolf, & Cabbage LLC, designers Max Temkin, Mike Boxleiter, and Tommy Maranges, and illustrator Mackenzie Schubert. All prints made from these files must be for personal use only and cannot be sold.

board games

multicolor

secret hitler

Comment & Rating (60)

@buhbang

edit: finished printing now and the game looks ready to go! looking forward to playing it next week holiday and christmas! thank you for the print!! This model is so awesome! I’m printing it right now and it’s mostly completed but one thing I noticed was that once the storage box was filed with the 4 part boards to the top, it’s really hard to take out without flipping container upside down. is there a way to modify this so it’s easier to take out the contents inside?

(Edited)

The designer has replied

@JungyBrungy

So what works for me is you can push all the boards down in one corner (where the placards are) and they all lift up so you can easily grab them, give that a try and let me know how it is!

@buhbang

ah okay. that does work for me except sometimes the very bottom board doesn’t like to pop up all the way for me to grab. it’s just a minor inconvenience. thank you so much for this model!!

@JungyBrungy

No problem! I'd love to see pictures when you're done!

@user_724956140

Boosted

A truly beautiful game, yet somewhat challenging to print in my experience The non-matte colors are clearly visible on the game cards, and there is some slight smearing of the black ink underneath the lighter colors on the game board The lid proved difficult to slide along the groove, making removal somewhat cumbersome However, this remains the best model for this game

The designer has replied

Show original

@JungyBrungy

Looks great! Thank you for the feedback. White filament is almost never entirely opaque so it would prove challenging for the double sided printing of the cards where you'd be able to see the colors on the other side. For the game boards, I split them in half in the BambuStudio slicer and when doing so, it affected the way the colors are distributed near the inner edges, I tried to avoid this by painting the colors thicker on those inner sides but it didn't do enough, I wish there was a way to get each section of colors thicker to avoid the bleeding, I supposed they could also be printed without the black base and instead with more blue or red.

@user_724956140

Boosted

Replying to @JungyBrungy :

There must be a way to color the underlying part of the board

@HivelyD

Boosted

Played this a couple of years ago and liked it. Solid print and can't wait to play it!

The designer has replied

@JungyBrungy

Looks great!

@Dirtyjava

Boosted

I own this board game. it's one of my favorites. so when I saw this I knew I had to print it. thank you.

The designer has replied

@JungyBrungy

Looks great!

@myung

Boosted

Details are awesome! great print! I used a mix between this design and another that is a bit more portable and uses a lot less filament.

The designer has replied

@JungyBrungy

Awesome it looks great!

@user_445987083

Print Profile

0.16mm layer, 2 walls, 15% infill

The designer has replied

@JungyBrungy

Looks great!

@TheWildDerrito

i mean i like it but is there any way that this is not copyright infringement...?

The designer has replied

@JungyBrungy

The Secret Hitler game is copyrighted under the same CC BY-NC-SA, which means you are free to Share: copy and redistribute the material in any medium or format, and Adapt: remix, transform, and build upon the material, and you have to license it under the exact same CC license which this model is.

@TheWildDerrito

Replying to @JungyBrungy :

oh thays awesome good to know and well done!

@clyde051

Replying to @JungyBrungy :

Wonder if you have seen or can make Secret Hitler - Trump Pack ? https://boardgamegeek.com/boardgameaccessory/228781/secret-hitler-the-trump-pack

@JuanDeLaRossa

Boosted

Amazing design! Are you planning on making an expansion with the Communist board as well? And what did you use to design this beauty??

The designer has replied

@JungyBrungy

No plans to do the communist board any time soon, but maybe someday if I don't have a new project I can make it! I used Fusion 360

@edeneast

Replying to @JungyBrungy :

Could you provide a step file or the fusion files used to make this. Would like to play around with making the expansion but dont want to reverse engineer them from stl files.

@JungyBrungy

Replying to @edeneast :

Just uploaded both the f3d and step files, excited to see what you do with the expansion!

@Xaanty

Amazing i love it but can you do smaller version to print for a1 mini ? Thank You

The designer has replied

@JungyBrungy

I am on holiday break, I will make a profile for A1 mini when I get the chance

(Edited)

@JungyBrungy

I attempted to make a profile for the A1 mini, but the game box is too large for the build plate. I wouldn't recommend scaling down the pieces any further due to the detail in the prints either as anything smaller than what i uploaded did not pass any of my print tests, the text just gets too small

@goatwolfcabbage

We love what you've made here! The Secret Hitler Team does have a few questions though. And don't worry, we're not going to ask you to take it down. Please email us at secrethitlergame@gmail.com to discuss! - Maya, Community Manager