Einstein 2

Project: einstein 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120x163.35mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA smartfil azul Transmission Distance: 1.8
PLA Smart Recycled Dark Blue Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Dark Blue
At layer #28 (1.84mm) swap to azul

Border Only Colors from here until the end.
At layer #29 (2.24mm) swap to White for the rest.