JD Foldable Pocket Comb V4.1 by jakobdam

jakobdam

Tools>Hand Tools

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

NEW v4.1: 0.16mm layer, 5 walls, 40% infill

Designer

1.3 h

1 plate

4.7(41)

V4.0: 0.16mm layer, 5 walls, 40% infill

Designer

1.3 h

1 plate

4.6(103)

0.16mm layer, 5 walls, 40% infill

1.3 h

1 plate

4.6(19)

STRONG + ONE COLOR + 0.12mm layer, 5 walls, 40% infill

1.7 h

1 plate

4.7(12)

Click to see more

Open in Bambu Studio

Boost

1225

2243

281

174

3.1 k

2 k

Released

Description

JD FOLDABLE POCKET COMB V4.1

HANDY POCKET SIZE COMB FOR HAIR - FUR - BEARD

Messy hair? Messy beard? Messy dog?

Fear no more, for the solution is here… Now upgraded!

STRONG TEETH - for clots of fur or tangled hair
SMALL AND POCKETABLE - with great ergonomics
STYLISH LOOKS - in your hand and on the desk
ROUNDED TEETH - each tooth has a rounded cylinder, making the comb less prone to scratching the scalp

V4.1 updates: (2024-11-15)

Easier assembly: Many wrote that they have issues assembling. I must confess that my finger strength is probably way beyond the average, due to being a piano and guitar player as well as speed cuber. I made the hole in the hinged part of the comb larger, so it's easier to press-fit.
Adjusted position on the build plate for better part cooling on the shell's overhangs and better build plate adherence of the comb's teeth: Noone really had issues with this, but I'm very picky with overhang quality, and I had very rare print failures when print the comb part with PETG-HF, and this 4.1 iteration has eliminated these failures fully.
Minor slicer setting adjustments, mainly to the speeds of the shell, which can be printed a bit faster without sacrificing any quality.

V4 updates:

Stronger hinge with better and much more secure fit
Thicker in your hand for more comfortable use

---------------------------------------------------

ASSEMBLY

1: Position the comb part with the shell

2: Press it into place: Force is required, but be careful not to break the comb while pressing it into place!

If you look for a comb that's faster to print, try the old v3.1:

JD Foldable Pocket Comb V3.1 by jakobdam - MakerWorld

Comment & Rating (281)

@longlogin

Print Profile

V4.0: 0.16mm layer, 5 walls, 40% infill

It's really great design! The only improvement I'd suggest to make is to make the connection a bit less tight, as I couldn't assemble it until I just took pliers and removed ~1mm of plastic from the hinge I'd also want it to 'lock' in opened position (similar to how to does it in closed position)

The designer has replied

@hackmann

same here... i had to trim off.... it is working nice now.

@sandlog

Can you explain how you did that. I’m not sure what tool to use and how did you get the plastic off the hinge. I printed this twice and I’m stuck. Thanks.

@_xMaS_

Replying to @sandlog :

Just cut off the corners of the comb head connector with a pliers. Essentially to make the round cutoff wider.

@LbJojo

Boosted

Print Profile

V4.0: 0.16mm layer, 5 walls, 40% infill

Love it. I did print it at 150% as I like a bit more space between the tines. But great design. It is already in my travel bag. Thanks

The designer has replied

@jakobdam

Thanks for the boost! Does it work nicely at 150%? What I mean is; if the hinge and lock-in-place when folded mechanisms are working as they should...?

@LbJojo

Boosted

Replying to @jakobdam :

I printed both parts in PETG. It was impossible to click the hinge in place, so I had to cut the opening just a tiny bit wider. The lock in place works perfectly. When opened it is a bit loose, but I don't mind that.

@longlogin

Replying to @LbJojo :

Looks like I'm not the only one having a problem with the hinge :) But I printed mine in PLA

@cimentic

Print Profile

V4.0: 0.16mm layer, 5 walls, 40% infill

nice design but hard to put on!

The designer has replied

@jakobdam

Hi and thanks for the review: A new v4.1 has just been released (2 1/2 hours after your review). This version has more room for joining the hinge of the parts, making it noticeably easier to assemble.

@cimentic

Replying to @jakobdam :

The best and fast reply and product, bravo! :))

@jakobdam

Replying to @cimentic :

It was luck :) I had the alteration done two days ago but had no time to test it properly before a 2-day business trip. I got home late yesterday, tested, revised, reprinted and today I was (finally) ready to release the change.

@androide159

Print Profile

STRONG + ONE COLOR + 0.12mm layer, 5 walls, 40% infill

eSUN PLA+ Standard Profile

The designer has replied

Show original

@nyuks85

Very very nice! Thanks for pictures and comment!

@.maopa

Boosted

The print profile is no longer public

Good as always

The designer has replied

@Jordanlhq

Thank you so much for the five-star rating!

Show original

@deibson

Boosted

I printed both parts in PETG, to fit them I had to use a little force, but it fit, thank you for sharing!

Show original

@replytobrett

Had to do some filing to make the comb fit into the handle but finally got it.

@Amn2009

The print profile is no longer public

Ptinted absolutely fine. Might scale it up a bit next time though. 😊

The designer has replied

@Jordanlhq

Thank you so much for the five-star rating!

Show original

@thor018

Boosted

Print Profile

NEW v4.1: 0.16mm layer, 5 walls, 40% infill

Perfetto

@user_2241690438

Boosted

Great compact comb and looks cool, but needed sanding to get it to fit.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.