Polydryer Skadis Hanger V2
Print Profile(1)
Bill of Materials
- DC5525 Power Extension Cable, DC 5.5mm x 2.5mm Right Angle Male to Female Power Adapter Cable x 1: https://a.co/d/fMpTLRq
Description
Here is my second take on a hanger design for the Polymaker Polydryer. I have another design for a different mounting orientation available here. This design takes up less space on the Skadis board, while allowing access to the power switch in the back through a cutout. The original plug for the poly dryer is too long to fit into this design, therefore, an additional 90 degree extension cable to facilitate a proper fit can be purchased HERE. I made my design from scratch in Shapr3D. Includes storage for filament box plugs!
The print profile is sliced in such a way that the main attachment hooks are printed solid, without infill. I have not tested this long term with the dryer running. It feels very sturdy on my Skadis board, but may change due to heat from the dryer operation. The hook tolerances are very snug on an original wood finish skadis, which wiggle into place with general ease.
If you enjoy this or any of my other models, please consider supporting!
https://buymeacoffee.com/divebombdom
Boost Me (for free)
IF YOU ENJOY THIS MODEL, PLEASE CONSIDER BOOSTING, LIKING AND RATING MY PRINT PROFILE. FOLLOW FOR MORE!
DISCLAIMER: I AM NOT RESPONSIBLE FOR FAILURES AND/OR EQUIPMENT DAMAGE, DUE TO VARIABLES OUTSIDE OF MY CONTROL AS A DESIGNER. (E.G. - FILAMENT QUALITY)
USE AT YOUR OWN RISK!
Boost Me (for free)
Hey Makerworld friends! I pour my creativity, time, and passion into every 3D model I share here, and your support makes all the difference. A simple boost not only helps me gain visibility but also inspires me to keep pushing the boundaries of what I create. If you’ve enjoyed or benefited from my work, please take a moment to 🚀 BOOST—it means the world and fuels my ability to keep contributing to this awesome community!
License
Comment & Rating (48)