If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
3-color HueForge Walter White Breaking Bad. Enjoy! ;-)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Orange Transmission Distance: 10
PLA BambuLab Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Orange
At layer #9 (0.8mm) swap to Yellow for the rest.
Reminder:
My models mostly cover the entire bed,
this means the purge line is sometimes
running through the bottom of the print.
You have 3 options here:
- Leave as is, you can just cut them of afterwards.
- Remove immediately after the purge line is printed.
- Scale the model:
*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.